Single Phase Electrical Booster Water Pump Motor 180W 250W For Lancer Beverage Machine

Single Phase Electrical Booster Water Pump Motor 180W 250W For Lancer Beverage Machine

Introduction

This page shows a 120-250W electrical water pump motor for booster water pumps for cola or beverage machines.

Till now, Hengsheng has a variouty of specifications of electric water pump Motors, and different induction motor, geared motor, PM motor with gearbox. Because of its long working life, stable performance and low failure rate, our products are well received by customers. We have got the certification of CCC, RoHS and ISO9001:2008.

Specification

Features of electrical water pump motor

1. All listed in the table are parameters for the universal type.

• Dimensions can be designed according to requirements, and special dimensions can also be made by opening moulds.
• The rated voltage frequency, output, current and rotate speed can be designed according to requirements
• Suitable for household pumps and similar uses.

More information of electrical water pump motor

The cause of overheating of the electric water pump motor.

1. The electrical water pump uses a new motor, but the new motor does not meet the standard of the original motor, but the load on the motor is very large, and the motor will overheat.

2. Working environment. The working environment will also have an impact on the electrical water pump motor, a lot of dust and grease these common impurities attached to the motor, a point attached to the connection point between the wires of the motor may cause electricity...

3. The flow becomes smaller, if you find that the flow of the pump becomes smaller, then you should be vigilant, it may be that the irrigation pump operation is not done well, the flow rate becomes smaller, the temperature of the electrical water pump motor will gradually rise, and you will not get good heat dissipation.